New 9009A TerrainCut™ Rough Mower

Specifications

Compare >>> Select up to 2 models to compare specifications

John Deere9009A TerrainCut™ Rough Mower

Add Model --Please Select-- 6080A PrecisionCut™ Fairway Mower (Model year 2020) 6500A PrecisionCut™ Fairway Mower (Model year 2020) 6700A PrecisionCut™ Fairway Mower (Model year 2020) 7200A PrecisionCut™ Trim and Surrounds Mower (Model year 2020) 7400A TerrainCut™ Trim and Surrounds Mower (Model year 2020) 7500A E-Cut™ Hybrid Fairway Mower (Model year 2020) 7500A PrecisionCut™ Fairway Mower (Model year 2020) 7700A PrecisionCut™ Fairway Mower (Model year 2020) 8000A E-Cut™ Hybrid Fairway Mower (Model year 2020) 8700A PrecisionCut™ Fairway Mower (Model year 2020) 8800A TerrainCut™ Rough Mower (Model year 2020) 8900A PrecisionCut™ Large Area Reel Mower (Model year 2020) AR722T Groundsmaster® 4500-D

Add Model --Please Select-- 6080A PrecisionCut™ Fairway Mower (Model year 2020) 6500A PrecisionCut™ Fairway Mower (Model year 2020) 6700A PrecisionCut™ Fairway Mower (Model year 2020) 7200A PrecisionCut™ Trim and Surrounds Mower (Model year 2020) 7400A TerrainCut™ Trim and Surrounds Mower (Model year 2020) 7500A E-Cut™ Hybrid Fairway Mower (Model year 2020) 7500A PrecisionCut™ Fairway Mower (Model year 2020) 7700A PrecisionCut™ Fairway Mower (Model year 2020) 8000A E-Cut™ Hybrid Fairway Mower (Model year 2020) 8700A PrecisionCut™ Fairway Mower (Model year 2020) 8800A TerrainCut™ Rough Mower (Model year 2020) 8900A PrecisionCut™ Large Area Reel Mower (Model year 2020) AR722T Groundsmaster® 4500-D

Maximum rated horsepower	At 2800 rpm ISOC: 41.1 kW At 2800 rpm ISOC: 55.1 hp
Drive pump	Tandem gear pump
Ground pressure	82.7 - 124 kPa 12 - 18 psi
Throttle	No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display
Operator display	TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch™ and ON/OFF Weight Transfer and Cruise Control Use selection:; Cutting unit drop rate adjustment; ALL settings are pass code protected
Mowing speed	0 - 12.8 km/h 0 - 8 mph
Cutting unit size	68.58 cm 27 in.
Total width of cut	2.74 m; 17.15 cm overlap between front and rear decks 9 Feet; 108 in.; 6.75 in. overlap between front and rear decks
Reel diameter
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	409 m 16,097 fpm

Type	Direct Inject Turbocharged Diesel B20 compliant
Compliant emission regulation	United States/Canada Final Tier 4
Horsepower	Maximum rated horsepower At 2800 rpm ISOC: 41.1 kW At 2800 rpm ISOC: 55.1 hp
Cylinders	Four
Displacement	2.091 L 127.6 cu in.
Air cleaner	2-stage dry element
Fuel	Diesel up to B20 compliant
Cooling system	Liquid centrifugal pump; forward machine location for optimum cooling

Traction drive	eHydro™ servo controlled hydraulic traction pump provides flow to All-wheel-drive GRIP system; GRIP traction provides hydraulic flow between front and opposite rear wheel for increased traction to reduce 'high side tire slippage
Drive pump	Tandem gear pump
Cutting units drive	Direct-coupled hydraulic gear motor
Hydraulic system capacity	45.4 L 12 U.S. gal.
Fuel tank capacity	60.6 L 16 U.S. gal.
Steering	Hydraulic power with dual rod, double acting steering cylinder
Front drive tires	26.5x14-12 6PR Ultra Trac
Steering tires	20x12-10 4PR Turf
Ground pressure	82.7 - 124 kPa 12 - 18 psi
Brakes	Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS	Standard, meets ISO 21299 standards

Cutting units lowered	1814.37 kg with decks up 4000 lb. with decks up

Throttle	No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display
Forward/reverse	2-pedal
Mower lift	One-touch single handle
Parking brake	Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat	Air Ride Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO	Electric Switch on Command Arm for quick and easy transition from mow to transport
Ignition	Key Switch on Command Arm
Work lights	3 standard work lights in front
Tilt steering	Left Foot operated for easy adjustment
Operator display	TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch™ and ON/OFF Weight Transfer and Cruise Control Use selection:; Cutting unit drop rate adjustment; ALL settings are pass code protected
Storage	Operator storage located on left side for easy access from operator seat

Height with ROPS	2220 mm 87.4 in.
Length	3393 mm 134 in.
Transport width	2287 mm @ 101.60 mm height of cut 90 in @ 4 in height of cut
Mowing position width	2.74 m; 17.15 cm overlap between front and rear decks 9 Feet; 108 in; 6.75 in. overlap between front and rear decks
Wheelbase	1750 mm 68.9 in.
Ground speed	Mowing 0 - 12.8 km/h 0 - 8 mph Transport 0 - 20.12 km/h 0 - 12.5 mph Reverse 0 - 6.4 km/h 0 - 5 mph

Number	5
Size	68.58 cm 27 in.
Total width of cut	2.74 m; 17.15 cm overlap between front and rear decks 9 Feet; 108 in.; 6.75 in. overlap between front and rear decks
Height of cut	Construction single sheet 10-gauge steel stamped deck with front skid plate 1.5 inch (38mm) tall and ½ inch (12.7mm) thick steel stock welded to the decks edge 1.91 to 10.2 cm; no tool adjustment .75 - 4 in; no tool adjustment
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	Rollers Rear: 7.62 cm Rear: 3 in. Front: 12.70 cm Front: 5 in. 409 m 16,097 fpm
Reel diameter
Bedknife adjustment
Backlapping

Operator ear full engine	90 dBA
Operator ear reduced engine rpm (2300 rpm)
Measuring standard	ISO 11201
Attachments installed

Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality	25% load 3.63 Liters per hour (.96 GPH) 40% Load 5.64 Liters per hour (1.49 GPH) 50% Load 6.85 liters per hour (1.81 GPH )

Type	Two-year limited

Type	ANSI B71.4-2012.; CE