New H240 Loader

Loaders
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Available single-point hydraulic connection saves time
  • Hydraulics that improve cycle times and productivity
  • Integrated parking stands for easy attachment and removal

More Info

Features

False rod bucket cylinders improve productivity
False rod cylinderFalse rod cylinder
#

Fast bucket cycle times are important to dump the load from the bucket as quickly as possible, (quite often) in order to be as productive as possible, while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the mechanical self-leveling loaders.

 

Therefore, all MSL H-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.

Loader removal (parking) made easy
Parking standsParking stands
#

John Deere loaders are easily removed and reinstalled on tractors without tools. The parking system allows removing or attaching the loader to the tractor in minutes without the need for tools.

 

To remove or park the loader, apply slight down pressure to the loader boom with the bucket dumped at approximately a 30-degree angle. With the tractor in park, lower the parking stands and place the mast pins in the open position.

 

To watch a video of parking and attaching an H-Series loader click here.

Removing or parking the loader
Parking stand in stored positionParking stand in stored position
Removing parking standRemoving parking stand
Mast pin in the closed positionMast pin in the closed position
Rotating mast pin to the open positionRotating mast pin to the open position

Utilizing the boom circuit with the tractor in neutral, rotate the mast forward until the mast has rotated past the pin location on the mounting frame by extending the lift cylinder. Now using the bucket circuit, roll back the bucket until the mast is removed from the pocket and will clear the tires.

Mast pin in the open positionMast pin in the open position
Masts rotate forward, then bucket rolled backMasts rotate forward, then bucket rolled back

With the tractor in park, shut the engine off and relieve the hydraulic pressure as indicated for the tractor (rotating the joystick). Disconnect or open the single-point hydraulic connector (or remove couplers if no single point is installed).

Disconnect/open single-point hydraulic connectionDisconnect/open single-point hydraulic connection
Disconnect/open single-point hydraulic connectionsDisconnect/open single-point hydraulic connections

Store the loader half of the single-point connector or hoses, and back away from the loader.

Single-point hydraulics disconnectedSingle-point hydraulics disconnected
#
Parked loaderParked loader
Boom lockout for easy service
Hydraulic shut-off valve (open position)Hydraulic shut-off valve (open position)
Hydraulic shut-off valve (closed position)Hydraulic shut-off valve (closed position)

A hydraulic shut-off valve is included with the H-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.

Single-point hydraulic connection saves time
Single-point hydraulic connection on row crop tractor (closed)Single-point hydraulic connection on row crop tractor (closed)
Single-point hydraulic connection on utility tractor (closed)Single-point hydraulic connection on utility tractor (closed)

The H240, H260, and H310 Loaders can be ordered with a single-point hydraulic connection that also incorporates the connection point for any electrical needs. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

Specifications

Compare >>>

Select up to 2 models to compare specifications

John DeereH240 Loader
Add Model
Add Model
Tractor
Model 5085E, 5100E
Front tire 320/85 R24 BKT (12.4 R24)
Rear tire 18.4 R30
Front axle configuration
Wheelbase 90 in.
Pump capacity 11 gpm
Rated pressure 2828 psi
Loader
Leveling configuration Mechanical Self Leveling (MSL)
Bucket used General Purpose
1850 mm
73 in.
Bucket weight 178 kg
392 lb
Lift capacity at full height Measured at pivot (U)
1182 kg
2606 lbMeasured at 800 mm ahead of pivot (V)
1280 kg
2822 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
1611 kg
3552 lbMeasured at 800 mm ahead of pivot (X)
1584 kg
3492 lb
Boom breakout force Measured at pivot (Y)
2174 kgf
4793 lbfMeasured at 800 mm ahead of pivot (Z)
1836 kgf
4048 lbf
Bucket rollback force capacity At maximum height (VV)
1884 kgf
4154 lbfAt 59-in. (1500-mm) lift height (XX)
3095 kgf
6823 lbfAt ground-level line (ZZ)
3058 kgf
6742 lbf
Dimensions Maximum lift height (A)
3343 mm
132 in.At full height - bucket level(B)
3148 mm
124 in.At full height - bucket dumped (C)
2493.1 mm
98.2 in.
Overall length (I+F), ft (m) 4.5 m
14.7 ft
Overall height in carry position (J)
Digging depth (H) 93 mm
3.7 in.
Reach At maximum height (D)
780.0 mm
30.7 in.At ground level - bucket level (F)
2171 mm
85.5 in.
Bucket angle Dump angle, degrees (E)
-57.7 degree (angle)Rollback angle, degrees (G)
43 degree (angle)Dump angle, ground
-109 degree (angle)
Cycle times Loader raise, seconds
3.3 secondsLoader lower, seconds
2.2 secondsBucket dump, seconds
2.6 secondsBucket rollback, seconds
2.6 seconds

Accessories and Attachments

BUCKETS

1850-mm (73-in.) bucket with grapple attachment Included - BW15358
Five-tine round bale/silage grapple with grilleFive-tine round bale/silage grapple with grille
#

All of the H-Series Loaders use the same five-tine pin-on grapple. The advantages of this grapple are:

  • The pin-on method puts the least amount of stress possible on the bucket.
  • The grapple has a wide stance, making it more difficult to twist.

High-performance operators will choose the five-tine grapple for its increased durability and load-carrying capacity. Advantages include:

  • The ability to handle two large round bales instead of one (where loader capacity allows).
  • Strong grapple arms allow the bucket capacity to be increased by almost twice the amount of normal bucket capacity in materials such as silage.

The grapple is equipped with twin cylinders to provide excellent clamping force. 

NOTE: The center tine of the five-tine grapple is slightly off center to avoid contact with the placement of optional digging teeth.

NOTE: The grapple is not compatible with materials or high-volume buckets.

Ballast Box

Large Ballast Box - BW15852

Buckets

66 In. (1680 mm) General Purpose Bucket - BW15566

This general-purpose bucket can be used in numerous applications.

72 In. Quik-Tatch Heavy Duty Front Loader Bucket w/Replaceable Cutting Edge - LVB25342
72 In. Quik-Tatch Standard Front Loader Bucket - LVB25341
73 In. (1850 mm) General Purpose Bucket - BW15573

This general-purpose bucket can be used in numerous applications.

73 In. (1850 mm) Global Heavy Duty Bucket - BW15935
Heavy-duty bucket (shown with grapple)Heavy-duty bucket (shown with grapple)
#
73 In. (1850 mm) Global Materials Bucket - BW15937
Materials bucketMaterials bucket
#

Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.

 

NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.

84 In. Light Material Bucket - LVB25345
85 In. (2150 mm) Global High Volume Bucket - BW16006

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.

85 In. (2150 mm) Global Materials Bucket - BW15936
Materials bucketMaterials bucket
#

Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.

 

NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.

Carriers

Global Carrier - BW16304
John Deere 500 Style Carrier - BW16349
Skid Steer Style Carrier - BW16727
Skid steer carrierSkid steer carrier

The skid steer attachment carrier allows the use of skid steer-type attachments. One person can quickly change attachments without the use of tools by simply rolling the attachment back, lifting the levers, and then rolling the attachment forward and lowering to the ground.

Cutting Edges

66 In. (1680 mm) Replaceable Bucket Cutting Edge with Hardware - BW15819
73 In. (1850 mm) Replaceable Bucket Cutting Edge with Hardware - BW14763
85 In. (2150 mm) Replaceable Bucket Cutting Edge with Hardware - BW14267

Guards

Hood Guard - BW14254
Hood guardHood guard

For 5410, 5410N, 5420, 5420N, 5500, 5500N, 5510, 5510N, 5520, and 5520N Two-Wheel-Drive (2WD) and Mechanical Front-Wheel-Drive (MFWD) Tractors. The basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
  • Allow for lighting at night
  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.

Hood Guard - BW15084

The hood guard's basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
  • Allow for lighting at night
  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader
  • Cannot be used with a front hitch

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects. 

Hood Guard - BW16009
Hood guard for 5E Interim Tier 4 (IT4) 4-Cylinder TractorsHood guard for 5E Interim Tier 4 (IT4) 4-Cylinder Tractors
#

The hood guard's basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
  • Allow for lighting at night
  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader
  • Cannot be used with a front hitch

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects. 

HOOD GUARDS

Brush guard - BW15683
Hood guard - BW13780
Hood guard on 5303 TractorHood guard on 5303 Tractor
#

The hood guard is highly recommended for 5103, 5203, 5303, 5105, 5205, 5200, 5210, 5220, 5300, 5400, 5400N, 5403, 5310, 5310N, 5320, and 5320N Tractors. The basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
  • Allow for lighting at night
  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so the front weight is the first point of contact against lower stationary objects.

Hood guard - BW15817

The basic functions of the hood guard are:

  • Help protect the tractor's grille and hood from falling debris or stationary objects such as a wagon or mixer while loading
  • Allow for lighting at night
  • Typically can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
  • Cannot be used with a front hitch

It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.

Hood guard - BW16327

The basic functions of the hood guard are:

  • Help protect the tractor's grille and hood from falling debris or stationary objects such as a wagon or mixer while loading
  • Allow for lighting at night
  • Typically can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
  • Cannot be used with a front hitch

It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.

Hydraulic Connections

2 Function Frame Mounted Multi-Coupler - BW15853
2 Function Mid-Mount Quick Couplers - BW16340
Two function
Two function quick couplerTwo function quick coupler
#

The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To watch a video of how to use quick couplers click here.

NOTE: this video is intended to show the functionality of quick couplers only. Location of the connection varies across different loaders. 

Three function
Three function quick couplerThree function quick coupler

The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

2 Function Single Point Hydraulic Connection - BW16338
Single-point hydraulic connection on row crop tractorSingle-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series TractorSingle-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series TractorSingle-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frameSingle-point hydraulic connection with rigid lines on FT4 6R large frame

The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To view a video of removing the single point hydraulic connection, click here.

2 Function hoses and parts for Quick Coupler and Single Point Hydraulics Connection - BW17031
2 Function hoses and parts for Quick Coupler and Single Point Hydraulics Connection - BW17032
3 Function Mid-Mount Quick Couplers - BW16390
Two function
Two function quick couplerTwo function quick coupler
#

The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To watch a video of how to use quick couplers click here.

NOTE: this video is intended to show the functionality of quick couplers only. Location of the connection varies across different loaders. 

Three function
Three function quick couplerThree function quick coupler

The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

3 Function Single Point Hydraulic Connection - BW16391
Single-point hydraulic connection on row crop tractorSingle-point hydraulic connection on row crop tractor
Single-point hydraulic connection on 5E Series TractorSingle-point hydraulic connection on 5E Series Tractor
Single-point hydraulic connection on 5M Series TractorSingle-point hydraulic connection on 5M Series Tractor
Single-point hydraulic connection with rigid lines on FT4 6R large frameSingle-point hydraulic connection with rigid lines on FT4 6R large frame

The H240, H260, H310, H340, and H360 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

To view a video of removing the single point hydraulic connection, click here.

Adjustable Bracket - BW16867
Adjustable Bracket - BW16864
Multicoupler Bracket Assembly - BW16563

Hydraulic Controls

2 Function Hoses and Parts - BW16866
2 Function Hoses and Parts - BW16637
3 Function Hoses and Parts - BW16868
3 Function Hoses and Parts - BW16638

LOADER MOUNTED FENDERS

Stationary fenders (QuikTach) - BW15741
Stationary fender (H480 shown)Stationary fender (H480 shown)
#

Loader stationary fenders are highly recommended for those operating in conditions where the front axle will be in full oscillation and turn frequently or where tight turns are made while maneuvering through gates or obstacles that will catch tractor axle-mounted fenders.

 

The loader stationary fenders still provide coverage for debris from the tire, but they do not protrude to become damaged in operation. The fenders can be removed to enable better access for servicing as well.

LOADER SUSPENSION SYSTEM

Loader suspension system with manual on and off lever - BW15864
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Loader suspension system with operator station on and off switch - BW15797
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Loader suspension system with operator station on and off switch - BWA1713
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Loader Suspension System

Bracket Assembly - BW16546

MISCELLANEOUS

Competitive Attachment Adapter Brackets - 1 Pair - BW13919

Miscellaneous

Digging Teeth - BW15763

Digging teeth can be added to the heavy-duty bucket for easier digging in hard ground or for breaking loose hard-packed materials such as manure or silage. Digging teeth are not compatible with replaceable cutting edges.

Tooth Bars

66 In. (1680 mm) Tooth Bar - BW15589
73 In. (1850 mm) Tooth Bar for Bucket - BW15228

Tractor Mounting Frames

Mounting Frame - BW16057
5M mounting frame5M mounting frame
5M mounting frame5M mounting frame
6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame
6D (model year 2012 and prior) mounting frame6D (model year 2012 and prior) mounting frame
6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.

Mounting Frame - BW16580
5M mounting frame5M mounting frame
5M mounting frame5M mounting frame
6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame
6D (model year 2012 and prior) mounting frame6D (model year 2012 and prior) mounting frame
6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.

Mounting Frame - BW16579
5M mounting frame5M mounting frame
5M mounting frame5M mounting frame
6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame
6D (model year 2012 and prior) mounting frame6D (model year 2012 and prior) mounting frame
6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.

Mounting Frame - BW16060
5M mounting frame5M mounting frame
5M mounting frame5M mounting frame
6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame
6D (model year 2012 and prior) mounting frame6D (model year 2012 and prior) mounting frame
6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.

Mounting Frame - BW16322
5M mounting frame5M mounting frame
5M mounting frame5M mounting frame
6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame
6D (model year 2012 and prior) mounting frame6D (model year 2012 and prior) mounting frame
6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.

Mounting Frame - BW16559
5M mounting frame5M mounting frame
5M mounting frame5M mounting frame
6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame6E(Ft4) and 6D (IT4; model year 2013-2015) mounting frame
6D (model year 2012 and prior) mounting frame6D (model year 2012 and prior) mounting frame
6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame6M (small chassis), 6R (small chassis), 6030, 6030 Premium, 6020, 6010, 6000 Series Tractors mounting frame
5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame5E 4 Cylinder (IT4; 5085E, 5100E) mounting frame

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.